Disclaimer: The design specifications and construction of the wall shall comply with all building codes and standards. Parex USA installation guidelines are for general information and guidance only and Parex USA specifically disclaims all liability for the use of this design, for design engineering, and for workmanship of any project. The wall assembly shall be designed to prevent condensation within the assembly. The designer and the user shall provide final drawings and specifications.

The drawings and any related notes or text contained thereon, are based upon typical requirements of LaHabra exterior insulation and finish systems and are published strictly as a guide for architectural and construction industry professionals to illustrate typical or general design conditions.

These details are not to be used by themselves, and do not constitute design instructions for LaHabra EIFS application. These details must be used in conjunction with LaHabra current product specifications, product data sheets, and application instructions.

Any details shown are strictly for the purpose of illustrating typical LaHabra EIFS. Any other materials shown in any details are incidental to the details, and are included only for clarity of the LaHabra EIFS. Please consult with the manufacturers and/or suppliers of any separate materials for their product specifications and applications instructions.

Where site or design conditions not shown in these details are present, or any unusual design is involved, please consult with the Parex USA Technical Department for assistance.

PAREX USA DOES NOT WARRANT THE FITNESS OF SUITABILITY OF THESE DETAILS FOR CONSTRUCTION, OR ASSUME ANY LIABILITY FOR USE OF THESE DETAILS. IT IS THE SOLE RESPONSIBILITY OF ANY ARCHITECTURAL OR CONSTRUCTION INDUSTRY PROFESSIONAL TO APPLY THEIR PROFESSIONAL KNOWLEDGE IN UTILIZING THE INFORMATION CONTAINED IN THESE DETAILS.